Mikrotik Gigabit Ethernet WiFi Router – RB2011UiAS-2HnD-IN

Mikrotik Gigabit Ethernet WiFi Router – RB2011UiAS-2HnD-IN

The RB2011Ui is a low-cost multi-port device series. Designed for indoor use, and is available in many different cases, with a multitude of options.

The RB2011 is powered by RouterOS, a fully featured routing operating system that has been continuously improved for fifteen years.

Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration, and monitoring – are just a few of the vast number of features supported by RouterOS.

RouterBOARD 2011UiAS-2HnD has most features and interfaces from all our Wireless routers. It’s powered by the new Atheros 600MHz 74K MIPS network processor, has 128MB RAM, five Gigabit LAN ports, five Fast Ethernet LAN ports, and an SFP cage (SFP module not included!).

Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included)

RouterBOARD 2011UAS-2HnD-IN comes with a desktop enclosure, LCD panel, and power supply.

A wall mount kit (product code RBWMK) for the network closet is available for purchase as an optional accessory.

The RB2011Ui also has passive PoE output capability on the last port (ETH10), this means you can power another device just by connecting it over a regular Ethernet cable.

Technical Specifications

Product code: RB2011UiAS-2HnD-IN

Architecture: MIPSBE

CPU: AR9344

CPU core count: 1

CPU nominal frequency: 600 MHz

Switch chip model: AR8327

Dimensions: 214mm x 86mm for PCB

RouterOS license: 5

Operating System: RouterOS

Size of RAM: 128 MB

Storage size: 128 MB

Storage type: NAND

MTBF: Approximately 200’000 hours at 25C

Tested ambient temperature: -40°C to 60°C

Wireless capabilities

Wireless 2.4 GHz Max data rate: 300 Mbit/s

Wireless 2.4 GHz number of chains: 2

Wireless 2.4 GHz standards: 802.11b/g/n

Antenna gain dBi for 2.4 GHz: 4

Wireless 2.4 GHz chip model: AR9344

Wireless 2.4 GHz generation: Wi-Fi 4

Ethernet

10/100 Ethernet ports: 5

10/100/1000 Ethernet ports: 5

Fiber

SFP DDMI: Yes

SFP ports: 1

Peripherals

Serial console port: RJ45

Number of USB ports: 1

USB Power Reset: Yes

USB slot type: USB type A

Max USB current (A): 1

Powering

Number of DC inputs: 2 (PoE-IN, DC jack)

DC jack input Voltage: 8-30 V

Max power consumption: 11 W

Cooling type: Passive

PoE in    Passive PoE

PoE in input Voltage: 8-30 V

PoE-out

PoE-out ports: Ether10

PoE out Passive PoE

Max out per port output : (input 18-30 V)510 mA

Max total out (A): 510 mA