Mecer ME-3000-WPTU UPS, 3KVA Pro Smart Online Tower UPS

Product Features

High Capacity

The UPS has a high capacity of 3000VA/2700W, making it suitable for use with larger electronic equipment such as servers, workstations, and high-end gaming PCs.

Online double-conversion topology

The UPS uses online double-conversion technology, which provides continuous power supply even during a complete power failure.

Surge protection

The UPS includes surge protection to safeguard connected devices from voltage spikes and surges.

Automatic Voltage Regulation (AVR)

The UPS has AVR to stabilize voltage levels and protect equipment from undervoltage and overvoltage conditions.

LCD display and audible alarms

The UPS features an LCD display that provides information on the status of the device, including battery level, load capacity, and input/output voltage. It also has audible alarms to alert you of any power issues.

Battery backup time

The UPS has a battery backup time of up to 10 minutes at full load and up to 20 minutes at half load, depending on the power consumption of the connected devices.

USB interface

The UPS has a built-in USB interface that can be used for power management and monitoring.

Rack-mountable design

The UPS is designed to be installed in a rack and includes mounting brackets for easy installation.

SNMP compatible

The UPS is compatible with SNMP (Simple Network Management Protocol) for remote management and monitoring.

Hot-swappable battery

The UPS has a hot-swappable battery, which allows you to replace the battery without turning off the UPS or interrupting power to connected devices.

Product Specifications

Phase Single phase with ground

Capacity 3000 VA / 2400 W

Input

• Voltage Range
• Low Line Transfer 176 VAC ± 3% @ 100% load, 110 VAC ± 3% 50% load
• Low Line Comeback 186 VAC ± 3% @ 100% load, 120 VAC ± 3% 50% load
• High Line Transfer 300 VAC ± 3%
• High Line Comeback 290 VAC ± 3%
• Frequency Range 46~54 Hz or 56~64 Hz
• Power Factor ≥ 0.99 @ 100% load

Output

• Output Voltage 208/220/230/240 VAC
• AC Voltage Regulation (Batt. Mode) ± 1%
• Frequency Range (Synchronised Range) 46 ~ 54 Hz or 56 ~ 64 Hz
• Frequency Range (Batt. Mode) 50 Hz ± 0.1 Hz or 60 Hz ± 0.1 Hz
• Current Crest Ratio 3:1
• Harmonic Distortion ≤ 3 % THD (Linear Load), ≤ 5 % THD (non-linear load)
• Transfer Time AC Mode to Batt. Mode Zero
• Inverter to Bypass Zero
• Waveform (Batt. Mode) Pure Sinewave

Efficiency

• AC Mode 90%
• Battery Mode 88%

Battery

• Battery Type 12 V / 9 Ah
• Numbers 6
• Typical Recharge Time 9 hours to recover to 90% capacity
• Charging Current (max.) 1.0 A
• Charging Voltage 82.1 VDC ±1%

Indicators

LCD Panel UPS status, Load level, Battery level, Input/Output Voltage, Discharge timer and Fault Conditions

Alarm

• Battery Mode Sounding every 4 seconds
• Low Battery Sounding every second
• Overload Sounds twice every second
• Fault Continuously sounding

Physical

Dimension, D x W x H (mm) UPS: 630 x 483 x 88 [2U] Net Weight (kgs) UPS: 29.3

Environment

Humidity 0-95 % RH @ 0-40°C (non-condensing)

Noise Level Less than 58dB @ 1 Meter

Management

• Smart RS-232/USB
• Supports Windows® 2000/2003/XP/Vista/2008, Windows® 7/8, Linux, Unix and Mac
• Optional SNMP
• Power management from SNMP manager and web browser