10% Off
Description
Secolink Universal communicator GSV5 Alarm GSM/GPRS Kit
Secolink Universal communicator GSV5 Alarm GSM/GPRS Kit is designed to be used in objects along with other manufacturers’ intruder alarm systems. It gives options to report to the receiver of CMS, to control and monitor the system with the mobile app SECOLINK PRO (set on TCP/IP or SMS communication), with simple SMS messages, or with a phone call.
Product Specs
| Features | GSV5 |
| Description | Versatile GSM/GPRS communicator |
| Product Type | Alarm system module |
| In-built wired zones on board | 6 |
| On-Board (open collector type) PGM | 2 |
| Reporting to CMS format | CID by GPRS |
| Reporting protocols for CMS | E2 (Enigma), FIBRO (Sur-gard), CSV (Patriot), SIA |
| Compatibility with control panels via KEYBUS | PC5xx, PC14xx, PC15xx, PC16xx, PC18xx |
| Compatibility with control panels via SERIAL | SP4xxx, SP6xxx, SP7xxx, EVOxxx |
| Compatible with SG-SYSTEM II, III IP card | Yes |
| Alarm message for the end user | SECOLINK PRO app, GSM call, SMS |
| Available language for voice guide | English (available in other languages) |
| Available language for SMS | English (available in other languages) |
| DTMF converting from PSTN to GPRS | Yes (one way) |
| Available in a plastic enclosure | Yes |
| Maximum current into -PGM1 | -0.05 A |
| Maximum current into -PGM2 | -0.05 A |
| Power supply from an independent source of power: | |
| Maximum battery charging current | +0.035 A |
| Rated voltage of power supply (AC) | ~20 V |
| Minimum AC voltage | ~16 V |
| Maximum AC voltage(Note: higher than ~22 V voltage can damage the control panel) | ~22 V |
| The maximum current of slow blowing fuse used in primary AC | 250 mA |
| Maximum AC power consumption | 15 mA |
| Power supply from a Control Panel source of power: | |
| Power supply (DC) | 9 – 14 V |
| Current consumption | 50 mA |
| Current consumption with all PGM’s | 260 mA |
| Overall dimensions W x H in mm | 120 x 64 |
| Environmental compliance | ROHS |
| Operating temperature | From -10oC to +50oC |
| Interface for communicator settings programming | USB |
| Interface for communicator firmware updating | USB |
Reviews
There are no reviews yet.