Ubiquiti Networks PBE-5AC-620 PowerBeam ac High-Performance airMAX Bridge
Incorporating a dish reflector design with proprietary airMAX ac technology, the Ubiquiti PowerBeam PBE-5AC-620 ac is ideal for CPE deployments requiring maximum performance.
Ubiquiti’s airMAX engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.
Ubiquiti PBE-5AC-620 PowerBeam Specifications
PERFORMANCE | |
Processor | Atheros MIPS 74 Kc, 720 MHz |
Memory | 128 MB DDR2, 8 MB flash |
Networking Interface | 1 x 10/100/1000 Ethernet port |
Wireless Approvals | FCC, IC, CE |
RoHS Compliance | Yes |
Power Supply | 24 V, 0.5 A Gigabit PoE |
Power Method | Passive PoE (Pairs 4, 5+, 7, 8 Return) |
Voltage Range | 20 to 26 VDC |
Max Power Consumption | 8.5 W |
Gain | 29 dBi |
Operating Frequency | 5725 – 5850 MHz |
Wind Loading | 872 N at 200 km/h (196 lbf at 125 mph) |
Wind Survivability | 200 km/h (125 mph) |
LEDs | 1 x Power 1 x LAN 4 x WLAN |
Signal Strength LEDs | Software-adjustable to correspond to custom RSSI levels |
Channel Sizes | PtP Mode: 10/20/30/40/50/60/80 MHz PtMP Mode: 10/20/30/40 MHz |
Polarization | Dual linear |
Enclosure | Outdoor UV stabilized plastic |
Mounting | Pole-mount kit included |
ESD/EMP Protection | Air: ± 24 kV Contact: ± 24 kV |
Operating Temperature | -40 to 158°F / -40 to 70°C |
Operating Humidity | 5 to 95% non-condensing |
Salt Fog Test | IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5 |
Vibration Test | IEC 68-2-6 |
Temperature Shock Test | IEC 68-2-14 |
UV Test | IEC 68-2-5 at 104°F (40° C), Equivalent: ETS 300 019-1-4 |
Wind-Driven Rain Test | ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5 |
Reviews
There are no reviews yet.